acr
New Member
Posts: 17
|
Post by acr on Apr 14, 2010 8:58:43 GMT -6
Damon, On a 2x4 set up for street use, where do you suggest setting the (at idle) primary & secondary throttle plates in relation to the transfer slot?
Thanks, acr
Mild flat tappit cam 220 dur/.490 lift.
|
|
|
|
Post by fugly on Apr 20, 2010 21:09:24 GMT -6
Holleys or Eddy's?
|
|
acr
New Member
Posts: 17
|
Post by acr on Apr 21, 2010 9:11:59 GMT -6
Carter AFB, the two 400 CFM I've been doing forever!  |
|
|
|
Post by fugly on Apr 21, 2010 17:30:35 GMT -6
leave the secondaries alone- there is no real idle circuit on them....set the primaries to expose .010- or so of the transirion slot under the blades
|
|
acr
New Member
Posts: 17
|
Post by acr on Apr 21, 2010 20:52:33 GMT -6
Thanks but please explain. Do you mean close the primary plates on the secondary carb shut? To clearify my question, I'm asking about the primary plate settings on both carbs in a 2x4 set up. Sorry if my question was confusing.
|
|
|
|
Post by fugly on Apr 22, 2010 6:56:19 GMT -6
|
|
acr
New Member
Posts: 17
|
Post by acr on Jun 16, 2010 5:24:10 GMT -6
Moved to new post.
|
|
