Post by fugly on Mar 10, 2010 15:29:43 GMT -6
Abomination
318 Poly Roller Rockers Soon?
« on: November 25, 2008, 09:02:16 PM »
Wow guys... check out this press release. Don over at Racer Brown quoted me $800/set for an initial 10-set run! This sounds even better!
Anyway, just an FYI, not SPAM. Figured folks would like to know.
~Jason
Polyheads,
Roller rockers are ready for the Poly now.
I will need three orders at $800 a set to get the first three roller rocker sets made; price decreases with more orders but at this price I am hoping for the three orders needed for production.
Yes, they are expensive, about $250 more than the best LA roller rocker set but that is the price of admission for a quality set of Poly Roller Rockers.
The material is 2024 aluminum - a cold finished casting with superior strength over the Comp Cams/Crane offerings.
I am not benefiting from these three or any future orders in any way, just trying to complete the circle of true High Performance Poly parts to the few that take their engines to the next level.
Our mfgr. is not making a normal profit on the creation of these roller rockers either; I am thankful that he has even committed to the project.
Poly Roller Camshafts are in the near future.
Please forward any orders and serious inquiries to me off-list at glpavlovich@cox.net
Thank you,
Gary
fugly
Re: 318 Poly Roller Rockers Soon?
« Reply #1 on: November 25, 2008, 10:22:22 PM » Great news...I've been too busy to accomplish much, but hope to rejoin the fight soon....
Abomination
Re: 318 Poly Roller Rockers Soon?
« Reply #2 on: November 28, 2008, 10:03:07 AM »
As always, we'll be glad to have you on the front lines, sir!
~Jason
Scarecrow
Re: 318 Poly Roller Rockers Soon?
« Reply #3 on: February 17, 2009, 05:53:21 PM »
"I Know im late in Replying!
But this is Great News Now i just have to wait untill our exchange rate improves against the US Dollar like it was 6 Months back
But i would really be keen on a Set of those.
Roller Cam sounds like a Good idea to..
318 Poly Roller Rockers Soon?
« on: November 25, 2008, 09:02:16 PM »
Wow guys... check out this press release. Don over at Racer Brown quoted me $800/set for an initial 10-set run! This sounds even better!
Anyway, just an FYI, not SPAM. Figured folks would like to know.
~Jason
Polyheads,
Roller rockers are ready for the Poly now.
I will need three orders at $800 a set to get the first three roller rocker sets made; price decreases with more orders but at this price I am hoping for the three orders needed for production.
Yes, they are expensive, about $250 more than the best LA roller rocker set but that is the price of admission for a quality set of Poly Roller Rockers.
The material is 2024 aluminum - a cold finished casting with superior strength over the Comp Cams/Crane offerings.
I am not benefiting from these three or any future orders in any way, just trying to complete the circle of true High Performance Poly parts to the few that take their engines to the next level.
Our mfgr. is not making a normal profit on the creation of these roller rockers either; I am thankful that he has even committed to the project.
Poly Roller Camshafts are in the near future.
Please forward any orders and serious inquiries to me off-list at glpavlovich@cox.net
Thank you,
Gary
fugly
Re: 318 Poly Roller Rockers Soon?
« Reply #1 on: November 25, 2008, 10:22:22 PM » Great news...I've been too busy to accomplish much, but hope to rejoin the fight soon....
Abomination
Re: 318 Poly Roller Rockers Soon?
« Reply #2 on: November 28, 2008, 10:03:07 AM »
As always, we'll be glad to have you on the front lines, sir!
~Jason
Scarecrow
Re: 318 Poly Roller Rockers Soon?
« Reply #3 on: February 17, 2009, 05:53:21 PM »
"I Know im late in Replying!
But this is Great News Now i just have to wait untill our exchange rate improves against the US Dollar like it was 6 Months back
But i would really be keen on a Set of those.
Roller Cam sounds like a Good idea to..