|
Post by mopardave on Mar 11, 2016 6:52:22 GMT -6
when building a street 499/512 11.0:1 engine,440-1,under 7000rpm, are the aluminum main caps nessesary or can you use the stock cap with studs? 650/700hp deal once or twice/yr to the track. girdles or block fill required in a build like this? thanks
|
|
|
Post by nss7561 on Mar 27, 2016 22:17:50 GMT -6
Aluminum caps would add some reliability, nut are not necessary in this build. I would use them over a girdle Block fill optional, I would do a short fill on the street, not a full fill
|
|